NEWS

Some customers with corrugated board lines report that the rotary joint on the drying cylinder will leak after a few months of use. the main reason for the leakage of the rotary joint on the drying cylinder is that the rotary joint turns too little, Actually, it is harmful to keep it still rather than to make it rotating all the time.The steam rotary joint uses spherical seal.It is easy for the tube to rust when it touches the hot steam and water. Under the rotating condition, the sealing surface will not rust. However, if the rotary joint is…

Read More

QGX Steam Rotary Joints in Tengxuan Company is a customized high-end products in paper industry. It is mainly used in drying cylinder, paper rolling machine, coater, cold cylinder, paper guide cylinder, etc. The internal structure consists of elbow, end cover, housing, component, horizontal support pipe, seal ring and spring. QGX Rotary Joints & Cantilever Stationary Syphon Optimized balanced seal assembly Pistion absorbs axial misalignment Multi-spring assembly compensates for axial misalignment Antimony-immersed seal package Cantilever stationary syphon Support tubestrenthens syphon assembly to maintain optimum syphon clearance No maintenance required Extended seal life and increased reliability For high or moderate speed…

Read More

Txuan® Multi-passage Rotary Unions is widely used in construction machinery industry.With the development of tengxuan in the construction machinery industry in recent years, the product model has been gradually improved and widely used in the whole hydraulic system of excavator, crane, grader, tower crane, hydraulic vibrator, high-altitude working vehicle and other machinery. https://www.txuan1999.com/product-category/hydraulic-central-rotary-joints/ 1、Rotary joint for excavator 2、Crane rotary joint 3、Grab rotary joint 4、Crushing forceps Rotary Joints 5、Slewing joint for aerial vehicle 6、Rotary joint for road wrecker 7、Rotary joint for hydraulic vibrator  MCW8-14KS（Mini&small excavators） 、MCW8-14YC5(Small excavators) MCN6-18HT(Medium excavators) 、MCW6-19SY(Medium excavators) MCW6-22LH(Medium excavators)、 MCN6-23(Medium excavators) MCN13-20（Wheel excavators）、MCN15-20（Wheel excavators）

Read More

Wind power rotary joint is applied in the wind power industry of hydraulic rotary joint.In the fan industry is often referred to as the hydraulic slip-ring.Its main function is to connect the hydraulic system to control the fan to realize the function of changing the propeller.The ML01R040F rotary joint produced by our company is mainly used in 3MW wind turbines. 1、Connection mode and notes The ML01R040F wind swivel is connected to the main engine by bolts on the mounting flange.The actual working state of the rotating joint is rotation of the rotating shaft and housing stop (fixed state).The medium…

Read More

On November 14-16, 2023, the Russian pulp and paper, household paper exhibition opened at the Expoforum Exhibition Center in St. Petersburg, Russia.PulpForExpo is a Russian paper industry exhibition that showcases technologies, equipment and products for the manufacture and processing of various pulp and paper products. Tengxuan leader led the foreign trade and technical team to fly thousands of miles, show the products made in China, with professional product knowledge and rich experience in product application, carefully introduce the advantages of Tengxuan products for foreign friends, promote international exchanges and cooperation, and work together to win. Tengxuan focus on the…

Read More

The 1.25MWA wind power hydraulic rotary joint independently developed by Txuan Technology passed the test on the test bench of the company’s research and development center, and the test data were completely within the theoretical design range, which verified the high reliability of the wind power joint design. This joint is mainly used in the hydraulic variable pitch system of wind turbine. This joint adopts 2-channel design, suitable for high pressure hydraulic oil, stainless steel rotor surface is specially treated to enhance wear resistance, stator is made of aluminum alloy, brass, stainless steel and other corrosion resistant materials, in…

Read More

Some time ago, we received feedback from a printing equipment manufacturer that the rotary joint products purchased were leaking. Txuan products have always passed layers of inspection and testing before leaving the factory. Our products in the production and assembly process are strictly in accordance with the quality standards. Then Txuan arrange after-sales personnel rushed to customer on-site service. There was no problem in the on-site installation by the after-sales personnel, and the subsequent disassembly found that the inner part of the rotary joint had entered the iron cutting, causing the internal parts to wear and leak. It turned…

Read More

With the opening of the era of carbon neutrality, wind power, as the main force, ushered in a period of historic development opportunities. From October 17 to 19, the Beijing International Wind Energy Conference and Exhibition (CWP 2023) was grandly opened at the China International Exhibition Center (Shunyi Hall). It was not held last year due to the epidemic, but this year attracted more than 1,000 exhibitors from more than 30 countries and regions, focusing on the exhibition of cutting-edge products and solutions. Txuan Technology appeared at the wind energy exhibition, and many domestic and foreign wind power industry…

Read More

Since the Beijing International Wind Energy Conference and Exhibition was first held in 2008, more and more wind power enterprises, experts and scholars, technical elites have joined the CWP family to discuss technology, share experience, and plan development, making CWP a true vane and barometer of the development of China wind power industry. Beijing International Wind Energy Conference and Exhibition is the largest and most influential exhibition in the domestic wind energy industry. Thanks to the strong support of industry insiders and exhibitors at home and abroad over the years, the total area of the last exhibition was 60,000…

Read More

Best-selling products are inseparable from the pursuit of quality, only to achieve the ultimate quality, in the industry to create a reputation. Txuan has been adhering to the concept of creating high-quality products, the pursuit of quality details, products are exported to more than 30 countries and regions at home and abroad, machine tool high-speed rotary joint in the market for nearly 12 years, popular with the public, see how it is so popular. ● Unique and reasonable design High-speed design, high-precision bearing stable operation, no vibration, the maximum speed can be used is 20000RPM, the speed is stable,…

Read More

What kind of rotary joint is qualified？In fact, every rotary joint before the factory from the assembly to the test will pass the layers of checks, to ensure the quality of qualified, so that every new and old customers can be at ease to use. Today Tengxuan technology will show you the assembly workshop, in-depth understanding of the hydraulic rotary joint production process. 1、Assemble The assembler installs the hydraulic rotary joint in strict accordance with the work instruction. Installation steps: 1. Deburring; 2. Cleaning; 3. Install the end cover 4. Install the bearing (1) 5. Install the shell 6….

Read More

Steam Rotary Joint : Spherical seal, external compensation design, spring to push the shell to compensate for seal wear, complete the internal steam and external air seal.   Sealing assembly grinding process Spheroidal graphite cast iron Two Internal carbon support guides Extended seal life and increased reliability Rotary or Stationary syphon compatibility Thanks for the trust and support of old and new friends over the years, tengxuan has been tireless in the pursuit of customers to reduce costs, improve efficiency and provide overall solutions.We will continue to use technology innovation, quality and service to return to new and old…

Read More